Google
Pinoyagribusiness
March 29, 2024, 09:20:50 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
affordable vet products
News: 150 days from birth is the average time you need to sell your pigs for slaughter and it is about 85 kgs on average.
 
  Home   Forum   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Making Hollow Blocks from Farm Wastes:  (Read 1951 times)
0 Members and 1 Guest are viewing this topic.
mikey
FARM MANAGER
Hero Member
*
Posts: 4361


View Profile
« on: March 24, 2008, 02:58:21 AM »

Making Hollow Blocks from Farm Wastes
By Pinoy Farmer | February 7, 2008





METHOD #1

Rural folks can beat the high prices of housing materials. Out of farm waster and ordinary soil, one can make durable hollow blocks comparable in strength to commercial ones.

The hollow blocks can be made right on the building site and fashioned similar to commercial hollow blocks. Although considered strictly non-load bearing, it is very satisfactory for low cost housing. Its compressive strength ranges from 197 to 386 pounds per square inch (psi).

This simple technology, developed by the Forest Product Research and Industries development Commission, makes use of a minimum amount of cement to make a stronger hollow block. One bag is enough to make 20 four-inch blocks or 12 six-inch blocks.

The first step is to gather agri-wood waste such as sawdust, coconut trunk particles, sugar cane bagasse or ordinary soil. The latter has to be pulverized and sifted using a 1/4 inch wire mesh. Abaca waste, left after extracting fiber from the stalk, as well as coconut coir dust, the residue from processing coconut husk in coirflex plants, can also be used. Rice hull works too, but additional soil is needed when mixing this with the cement.

Improvise hand mold to shape the hallow block. This can be made out of steel or wood of relatively high density such as apitong, guijo or yakal. The mold should have three removable core blocks, and the sides should easily be opened and secured. Place hinges and lockpins as illustrated.

Using the cubic foot measuring box, mix together one box of cement and three boxes of agriwaste, or the equivalent proportions. With the materials form a hill with a crater on the top. Pour water slowly, then, thoroughly mix them with shovel until the paste is formed. The mixture must be neither too dry or too wet such that they would stay packed when molded and when not spread out when removed from the mold.

Place the flatboard at the bottom of the hand mold, then fill it with the mixture. Tamp and level off extra paste, then place another flatboard on the top. Turn the mold upside down, and tamp and level off as before.

After a while, remove the three core blocks and the pin to let the sides open. Gently push the molded hollow block from the mold, leaving it in place on the flatboard.

Place the hollow blocks in a shade for a few hours to dry. after one side has dried, turn the block upside down to dry the other side. Store these lock standing on their narrow edges.

For about ten days, cure them by occasional sprinkling water over the blocks. Afterwards, they are ready for use.

METHOD #2 - RICE HULLS

Procedure:

1. Carbonize the rice hulls.
2. Pulverize the ash.
3. Mix the following: 60 parts cement, 40 parts carbonized ashwater
4. Pour the mixture into wooden molds
5. Allow to dry.

METHOD #3 - WASTE MATERIALS

A new type of hollow blocks can be fabricated out of wood wastes, agricultural wastes and soil mixed with minimum amount of cement. As far as strength and durability are concerned, results of test showed that this type of blocks is comparable to some of the commercial or traditional concrete hollow blocks. However, they are considered as strictly non-loading bearing.

Materials:

1 part cement + 3 parts sawdust, ordinary soil, rice hulls, abaca waste, sugarcane bagasse, coconut coir dust and coconut trunk.

Procedure:

1. Pulverized soil is passed through a wire screen, 1/4 inch wire mesh to separate larger pieces. A mixture of 1 part cement to 3 parts agri-waste is formulated.
2. Mix all materials together, add water and pour into molds.
3. Let stand for several hours until dry.
4. After drying, remove from molds and let stand along one side for 10 days while sprinkling water at regular intervals to avoid cracking.

source: http://www.dost.gov.ph


Logged
Pages: [1]
  Print  
 
Jump to:  

< >

Privacy Policy
Powered by MySQL Powered by PHP Powered by SMF 1.1.3 | SMF © 2006-2008, Simple Machines LLC
TinyPortal v0.9.8 © Bloc
Valid XHTML 1.0! Valid CSS!